Rizoma Conical 22-29 Aluminum Handlebar, Sport Bend, color Black

TÜV approved

 
Rizoma Conical 22-29 Aluminum Handlebar, Sport Bend, color Black; TÜV approved

Rizoma Conical 22-29 Aluminum Handlebar, Sport Bend, color BlackRizoma Conical 22-29 Aluminum Handlebar, Sport Bend, color BlackRizoma Conical 22-29 Aluminum Handlebar, Sport Bend, color BlackRizoma Conical 22-29 Aluminum Handlebar, Sport Bend, color Black  

Manufacturer: Rizoma

Part Number: MA011B

This Product is available in our warehouse

Customer Questions & Answers: ( 16 )

Compatibility with my bike

Choose brand and model

 

Our Price
€ 100.82

 
Availability: In Stock
This Product is available in our warehouse
International Express (  U.S.A.):
Free Shipping !!!

 

  Description

Premise: Bikes equipped with one bar (naked, sport touring, etc), use bar with 22 or 29 (28,5mm) section in the middle, and 22mm section in the end part (where grips are located).
Custom as H-D use 1 inch bar, sports bike use two bars.
A 22 mm bar looks smaller than a 29 (28,5mm) bar, just watch the mid section.

Rizoma BARS: Rizoma produces FIVE handlebars:

  1. 22mm Standard Bar MA001
  2. 22-29 mm Conical Bar with Low Bend MA006
  3. 22-29 mm Conical Bar with High Bend MA009
  4. 22-29 mm Conical Bar with Sport Bend MA011
  5. 22-29 mm Conical Bar with Drag Bar Bend MA015

Measures:.

  MA001 MA006 MA009 MA011 MA015
L1 725 mm 745 mm 740 mm 755 mm 755 mm
L2 135 mm 138 mm 125 mm 110 mm 125 mm
β 23° +/- 1° 23° +/- 1° 23° +/- 1° 20° +/- 1° 10° +/- 1°
Ø d1 22 mm 28,5 mm 28,5 mm 28,5 mm 28,5 mm
Ø d2 22 mm 22 mm 22 mm 22 mm 22 mm
Ø d3 14 mm 14 mm 14 mm 14 mm 14 mm
H 45 mm 30 mm 55 mm 35 mm  

" H " measure is calculated between the bar fixing point axe to the grips axe, center to center .
Main Difference between Low Bend MA006 and High Bend MA009 is 25mm height. MA009 handlebar is higher so far.
MA011 is a Sport Bar: is large and open to dominate the steering, is short to push on the front wheel.
In 2016 Rizoma renewed the handlebar line, MA006 is the updated MA005, MA009 is the updated MA008, the main difference is the extra Length size, usefull to place wider electric controls.
MA011 is the updated MA010 (1mm narrower).
MA015 is the classich Drag Bar. We list only the application tested by Rizoma. To install MA015 on Street Triple RX the AZ402B riser is mandatory.

Conical Handlebars main features are : tougher than traditional handlebar, less vibrations (for conical shape), and naturally a great look.

Colors: Silver, Black, Gold, Red, Blue.

In the handlebar middle, graduated lines let you adjust inclination (white excluded).

Which bikes can be equipped with a Rizoma Conical Handlebar ?

  • Every bike that already comes with a stock conical handlebar.
  • Every bike that can be equipped with Rizoma Conical Adapters (risers).
Height

Rizoma Handlebar Conical Adapters for Rizoma Handlebars

  pn
+ 40mm Generic for upper triple tree with M10 or M12 bolt riser, Specific for 990 SuperDuke, Bandit, Fazer, FZ1, FZ8, GT 1000, Hypermotard, Monster 696/796/1100, Speed Triple, Street Triple, XJ6-N, Z 750/1000, detailed application list in the product page AZ402B
+ 60mm Generic for upper triple tree with M10 or M12 bolt riser, Specific for 990 SuperDuke, ER-6 09-, Fazer, FZ1, FZ8, GT 1000, Hypermotard, Multistrada 1000/1100, Monster 796/1100, Speed Triple, XJ6-N, XJ6-S, Z 750/1000, detailed application list in the product page AZ403B
stock Embedded Risers,Specific for Bandit GSF 600, CB 1000 R, ER-6 -08, FZ6, GSR, Hornet, Monster, Multistrada 620, R 850/1150R, TDM AZ405B
standard Specific for Ducati Monster 821 / 1200 AZ202B
standard Specific for Ducati Scrambler AZ203B
stock Specific for TMAX MA400B

FAQ:

Q: Can I mount the stock grips, master cylinders, levers, controls ? A: Yes of course, this handlebar is perfectly compatible with the oem parts monted over. It is not compatible with the stock handguards.

Q: my bike doesn't have a tapered handlebar, can I fit it? A: Yes, of course, if your bike does not already have a tapered handlebar as standard, you must necessarily purchase the adapter risers. Follow the instructions in the table and click on the adapter codes to check compatibility with your bike, or filter the site by your motorcycle model year.
If your bike is included in the application list of one of the adapters it means that it has been tested and that you can mount both the handlebar and the adapter using the original wires and brake lines. If the bike is not listed it means either that the fork plate is not prepared for mounting the adapters (you do not have the passing fixing holes for example) or that although both the riser and the handlebar can be mounted, the compatibility of the wires and brake lines has not been tested.

Copyright Carpi Moto srl.

Rizoma Official Web Reseller

OFFICIAL RIZOMA WEB RESELLER

Purchase from us with confidence, Rizoma chose Carpi Moto to reach every customer and every destination in the world.

 
  Customer Questions & Answers
Question:
 Hello,do i need anything else to apply this to my r nine t 2016 ? clamps etc...?
December / 04 / 2017
Answer:
You do not need anything else.

Question:
Hello, Is it possible to adapt any bar end in this handlebar (MA011B), including the oem bar end - (ninet 2016)And if it is possible do i need any adaptor?Thank you.
February / 15 / 2019
Answer:
On MA011B you shall use universal bar end not the oem, they won't fit .

Question:
 Good morning, I have in the ninet 2016, mirrors from Oberon performance (75mm Adjustable Bar End mirrors) in the oem handle bar. Should these bar end mirrors fit the Rizoma MA011B?Thanks, best regards
February / 16 / 2019
Answer:
The bar ends fit MA011 . You can't mount any bar end mirror over these bar ends.

Question:
 Hi can this bar ma0011 fit on ducati 2015 monster 1200s OEM handle or rizoma conical adaptor is required ?
April / 28 / 2019
Answer:
Thank you for contacting us through our website. Yes We confirm this part is correct. No Need adapters.

Question:
 Hi, do you recommend MA006 or MA011 for Aprilia Tuono V4 2012?
August / 12 / 2019
Answer:
MA006 is the right one .

Question:
 Which Rizoma handlebars would you recommend l go for, l need the handlebars to come slightly further back than the oem bars on my 2014 Ducati monster1200s as l am only 5ft 6 and l find l have to reach to far forward,l am looking for something that maybe kicks a inch or so further back kind regards Stephen
September / 18 / 2019
Answer:
Since we don't have oem bar measures it is not possible for us to answer to this question.

Question:
  Do you recommend MA006 or MA011 for Triumph street triple 765RS 2018?
February / 05 / 2020
Answer:
Rizoma recommends MA006 or MA009, we don't have a direct experience then we can't give you a different advice.

Question:
 Which model bottom clamp adapter I can use with MA011B on my 2014 BMW RnineT?
February / 08 / 2021
Answer:
You do not need any adapter.

Question:
salve.volevo sapere per il manubrio rizoma MA011B e alto 35 cm o 15cm,perche solo voi date la misura 35cm.io voglio comprare da voi il manubrio ma adeso non so che misura e reale.grazie tante e buona giornata
February / 19 / 2021
Answer:
35mm .

Question:
MA011B is the part nr that come up for direct replacement for BMW G 310 GS. MA011B bars are conical, but I OEM bars are not conical. Can I still use the bars on my bike, or will I need to change out the bar risers. Also are the inserts to bolt on the weights already installed in the bars?
March / 16 / 2021
Answer:
You need adapters like AZ402B or AZ403B .

Question:
 Hi, if I want to change the inclination of the bar to +3 on my bmw r9t will I have to drill new holes to move the clutch and brake controls etc?
April / 05 / 2021
Answer:
All the aftermarket handlebars have no factory drilled holes therefore you can adjust controls as you like.

Question:
Hello, I'd like to use the MA011 with AZ402B riser. Please confirm this will fit on 2012 Monster 795 without modifying cables. My understanding is that 795 is same as 696 for frame specs/sizes. MA011 should be closest to stock 795 handlebar (360.1.097.2A). Also is the height of the MA011 15mm or 35mm? I see both dims listed here. Many thanks for guidance.
May / 25 / 2021
Answer:
Rizoma doesn't confirm that MA011 could be used combined with AZ402B on M696. The correct handlebar is MA006 . Height: 35mm .

Question:
 Hi, i want to replace my handlebar on my 2012 monster 1100 evo. What is the recommendation ? Looking for something equal to stock measures.
March / 23 / 2022
Answer:
Rizoma recommends MA011 handlebars

Question:
Hi, I need the handler bar and handlebar conical adapter for Monster 796. Would MA011 and AZ402B comibination fit my stock bike?
November / 14 / 2022
Answer:
Thank you for contacting us through our website. Yes We confirm these parts are correct.

Question:
 Hi, I need to replace my stock handlebars on my Ducati Monster 100 Evo 2012 but would like a sportier look with more forward position (i am also getting rearsets). Which Rizoma bars should I be looking at and do I need to buy anything else or will the new bars be a straight swap ?
December / 19 / 2022
Answer:
MA011 is the Rizoma handlebar closer to oem handlebar. It is not a different or sporty upgrade. MA011 is the only handlebar recommended by Rizoma, we can't help you so far.

Question:
 I see the MA009 fits the MT-10 2022 but the MA011 don’t fit the 2022. Can explain why?
March / 21 / 2023
Answer:
Rizoma test the bars and provides the compatibility. We list what they tell us is compatible.

New Question

Questions & Answers placed here are related to the nature of this product, how it works, where it works, if it is useful etc etc, if you need help on another part please do not place your question here but inside its page.
This is not either the right place where to ask for price, availability, delivery, shipping, for this info click on "MyCarpiMoto" and then "Contact" at the top of the page.
Your Privacy: Do not add any personal information inside the question box, such as name, email, phone, everyone would read it; to protect your privacy, every question which includes personal informations is by default canceled.

 
 I have read and integrally accept information about use of personal data
*obligatory fields (will not be displayed, we only need them to send you the answer)

Linked Products




Rizoma Conical 22-29 Aluminum Handlebar, choose color; TÜV approved, requires specific adapters on ungeared bikesRizoma Conical 22-29 Aluminum Handlebar, choose color
Part Number: MA006
Availability: Select from the list
Price  € 100.82

Rizoma Conical 22-29 Aluminum Handlebar, Drag Bar Bend, color Black; TÜV approvedRizoma Conical 22-29 Aluminum Handlebar, Drag Bar Bend, color Black
Part Number: MA015B
Availability: In Stock
Price  € 100.82

Rizoma Conical 22-29 Aluminum Handlebar, High Bend, choose color TÜV approved; requires specific adapters on ungeared bikesRizoma Conical 22-29 Aluminum Handlebar, High Bend, choose color TÜV approved
Part Number: MA009
Availability: Select from the list
Price  € 100.82


Rizoma Handlebar Conical Adapter for Ducati Monster 821/1200Rizoma Handlebar Conical Adapter for Ducati Monster 821/1200
Part Number: AZ202B
Availability: In Stock
Price  € 129.51

Rizoma standard Ø 22 aluminum handlebar, choose color; TÜV approvedRizoma standard Ø 22 aluminum handlebar, choose color
Part Number: MA001
Availability: Select from the list
Price  € 73.77

Rizoma Top Clamp Set for BMW R nineTRizoma Top Clamp Set for BMW R nineT
Part Number: AZ452A
Availability: In Stock
Price  € 85.25

 
  Works on my Bike?
  • BMW 
  • Ducati 
  • KTM 
  • Suzuki 
  • Triumph 
  • Yamaha 
   Linked Products