Traf-X produces only high quality accessories , never settle, never compromising on product quality.
Traf-X Led indicator X-Light 02 is the state of the art Led Indicator:
- Shape Design , reminds the ultimate motorcycle design trend.
- Black Body / Matt White Lens
- Premium Quality through the use of Aluminum and High Power LED.
- Safety: High Power LED provides better visibility than the oem bulb indicators.
- Functionality : the indicators bends in all directions thanks to the antivibration articulated joints , you can twist in every direction, kick with your foot, load with bags, bends but does not break.
- Lifetime : Aluminum Body, Stainless Steel Stern and Nut , Protective Rubber Cap.
- All Inclusive : along with the indicator two resistors are included.
Led looks White when signal is off, Amber when on.
Traf-X Led indicator X-Light 01 is Street Legal.
Dimensions: full length 87mm, lens length 51mm, max width 24mm, lens max width 19mm, stern 20mm, stern diameter 8mm ( M8 ).
Each Item includes:
- 1 x Indicator.
- 2 x Resistors.
- 1 x Stainless Steel Nut.
- 1 x Washer.
- 1 x Rubber Cap.
- 1 x Install Instructions.
Please note that this item is sold one by one and not as a pair. Price is for 1 indicator.
If your motorcycle does not need resistors or you want to use a "led indicator relay", you can save money purchasing the version without resistors , it is listed among this page's linked products.
That version by the way , perfectly fits motorcycles where the CDI unit automatically adjusts the flash frequency ( eg on BMW nineT, R 1200 GS LC , etc ), or where Led indicators are already installed.
Wire terminals may be different from OEM plugs. Do not cut the wires. We recommend connecting the wires using specific optional adapters (not included). You may need also indicator mounting plates (not included).
PRICE IS FOR 1(ONE) INDICATOR
Question:
i just received itthe side tu use is the matt one or clear one?
January / 06 / 2015
Answer:
It is the part with the clear lens, like in the pictures shot on the back of the BMW Ninet
Question:
Merci Carpi Moto, :D very good, gret quality and ultra bright!!!!Better than my rizoma on my awsome Z1000Antoine
January / 14 / 2015
Answer:
Je suis content que vous êtes heureux
Question:
Benvenuto!O un paio di pezzi? Il prezzo?
March / 25 / 2015
Answer:
Non capisco la domanda, ne vuoi due ? basta che aggiungi due pezzi al carrello.
Question:
Can these be fitted to front and rear of bike?
July / 01 / 2015
Question:
Bonsoir, pouvez vous me communiquez les dimensions de ce clignotant (du bout du cligno à la première intersection puis la partie caoutchoutée qui va de cette intersection à la surface de contact du support de plaque et la longueur totale avec le couvre boulon caoutchouc). Est ce qu'il pourra être mis sur un support de plaque Rizoma PT111B (pour CB650F). Merci.
December / 08 / 2015
Answer:
Good Morning, lens is 51mm, total lenght is 87mm (visible part), rubber 20mm, total lenght (with rubber cap) 112mm. This fit with Rizoma plate holder
Question:
Hi,I am planing to buy this type of Led indicator, my ride is 2015 Triumph Scrambler.Do I need to buy anything else (resistor? relay? cable?)to let indicators function normally?Thank you very munchLawrence
January / 17 / 2016
Answer:
You don't need resistors because they are included (relay is alternative to resistors) . Cable would help to install but not necessary.
Question:
Dear SirToday i arrived my package. Thanks your fast delivery.But we have question about the LED indicator. I only found one side of LED indicator in it. Is it correct? it sould be pair for right side and left side.Look forward to get your suggestion.
February / 02 / 2016
Answer:
I checked your order: you ordered one part and we shipped one led indicator. It is correct.
Question:
Buon giorno vorrei acqistare le frecce per un fazer 600 del 2006 per favore potreste dirmi cosa serve per poterle istallare grazie
May / 06 / 2016
Answer:
Consiglio le piastrine. Trovi i prodotti che ti servono filtrando il sito per la tua moto, categoria Impianto ELettrico
Question:
I'm looking forward to buy a pair of Traf X 02 led indicators along with resistors to replace the stock rear indicators of my 2014 Honda CBR 1000 RR UK model. Since the front turn indicators & running lamps are integrated in the housing of rear view mirrors,do I need to add resistors in front turn turn lights? Since I would be changing only the rear turn indicators, would this affect the blinking of front turn indicators? Will I get a synchronised blinking in front & rear indicators; rear being converted to LED & front being kept stock. Should I buy two pole or three pole wiring loop? Does it requires any metal adapters to be purchased separately?
July / 31 / 2016
Answer:
In the indiocator box you will find the resistor kit that will allow you to set up the correct blinking. The schema is already available inside this page, just download the install pdf file. As far we know the rear wire cables are not 3 poles, you need the 2 pole version. For the best looking installation You might need indicator plates to close the stock indicator holes.
Question:
Hi. Please confirm if this is a M8 thread. I will need indicator extensions and need to make sure I order the correct part.
September / 15 / 2016
Question:
Hi.Bmw r ninet in. Traf-X led indicator x - 02 light).I'd like to buy.Among the components rubber cap for. After a non-governmental organization. Remove any existing indicatorBolt holes for hiding the right?
October / 12 / 2016
Answer:
I read many times your question but I don't understand what you ask. I try to answer: rubber cap are included, they are street legal, for hiding the holes we suggest to purchase Indicator Mounting Adapters FR221B and Traf-X Indicators Cable XW-BM01, plugs for BMW, 1 pair
Question:
The price of the indicators is 39.50. Is that for a single indicator or for one pair?Thanks
February / 28 / 2017
Answer:
Please note that this item is sold one by one and not as a pair. Price is for 1 indicator.
Question:
Hello, I want these lights for my Yamama XSR900. If I want to install both front and rear signals, simply buy two sets correct?
March / 17 / 2017
Answer:
No, this is one indicator therefore you shall purchase four pieces.
Question:
I have received these indicators and they simply will not fit on the rear of my 2016 Triumph Street Triple R. What are my options now for a refund?
March / 21 / 2017
Answer:
They do fit the rear of your Street Triple; state of the art install require mounting plates to replace the hole left by the oem indicators and requires wires, but with two simple 8mm whashers you can fix them. If you want to send them back no problem at all , write to sales@carpimoto.com and we will provide you a RMA number.
Question:
I have a 2016 tuono could you please tell me what I need to replace all 4 inc spacers ,wires relays etc thanks Iain
April / 20 / 2017
Answer:
For your model right now we have only the spacers FR221B, we don't know if wires are need and if they are produced by any brand.
Question:
Hi, I have a 2008 Buell xb12s.Do you know if I would require any mounting adaptors and/or cable kit plugs ?Thank you in advance, Darren
April / 25 / 2017
Answer:
Hi, yes it require mounting adaptors but we don't have them for your model.
Question:
HiBesides the 4 LEDs, can you tell me what kind of extra parts do I need to fit those in a NC 750X DCT 2016 RC90?Thanks
June / 01 / 2017
Answer:
Hi, you need 2 pieces of adaptors FR216B and 2 pieces of XW-HO01. These wires works only if your bike don't have daylight running lights always on.
Question:
Dear sir.I have a Moto Guzzi Griso 1200 8v se.Do I need any adaptator to fix the indicators?Thank you very much!Kind regards.Jorge
July / 31 / 2017
Answer:
For Guzzi are not available spacer, plates or wire adapters as for other brands. None of our suppliers produce them. You can install btw, you can adapt or built plates and connect indicators even without plug and play plugs. It is a standard business for every workshop or tuning garage.
Question:
Hello~ My bike is Ducati monster 796, will I need buy other adapters for installation?
February / 26 / 2018
Answer:
Hello, you need adaptor FR212B and cable adapters XW-DU01
Question:
A few days ago I bought: -4 Traf-X Led Indicator X-Light 02, 1 street legal Indicator-1 pair of cables XW-HO01 (rear lights)-1 pair of cables XW-HO02 (front lights, because of running light)I've already got the mounting plates.However, I just thought about, how many wires are coming from the LED light? In case of front blinkers wiring system, If there's only two wires coming out of the LED light, fase and ground, how do I connect the third wire on the cable for running light?
March / 28 / 2018
Answer:
You can't connect running light because this indicator does not have this feature.
Question:
Do you do need indicator mounting plates with triumph speed triple 2013
July / 12 / 2018
Question:
Do I need any mounting adaptor to fix this indicator to my Triumph Tiger xcx 2016 model, if yes can I have the link for that adaptor. Looking for set of 4 indicators.
November / 28 / 2018
Answer:
You need spacers and wires, you can find them in the category Lighting \ Indicators Wires & Adapters filtered by your motorcycle .
Question:
hello.Is posible to get TUV certificate for this product?In Slovenia isnt enough if is EC approved,I must have certificate.
April / 19 / 2019
Answer:
Indicators has not any TUV certificate because they are universal parts , they just have the EUhomologation that states they comply with the EU law. A TUV certificate will cost hundreads of thousands euro because it means that for every indicator should has been done a test over every the bike.
Question:
sorry,You dont understand me. I mean,if I buy this product,lets say,this week. Then if I get this E homologation? I will buy 4 this blinkers and place holder pt100b for my Honda CBR 1000 rr 2005 year model. Did I must buy something more? Resistors are included, so I dont need relay? Now I have normal bulbs.original
April / 19 / 2019
Answer:
You need 2x Traf-X Indicators Cable XW-HO01, plugs for Honda, 1 pair and 1 x Indicator Mounting Adapters for Honda models, MV Agusta F3, kit for a pair of indicators (for the front ).
Question:
Hi, I have a Triumph Speed Triple 1050 S 94 Edition 2016. What do I need for complete installation of the lights for both from and back?
November / 28 / 2019
Answer:
You need wires and plates, for example Rizoma EE082H + FR217B + FR218B. If you use the 'Compatibility with my bike' tool you can check it by yourself, and you will get useful tips to search for other compatible parts.
Question:
Hi there I have a 2015 Ducati icon scrambler. What do I need to purchase for these 4 indicators to work in relation to mounting and the electrical ??Cheers in advance
February / 05 / 2020
Answer:
You need wires EE079H and plates FR231B
Question:
Hello there. I see this product is compatible with my Multistrada 1200s 2015 motorcycle. Which wires and plates should I use. Thank you.
July / 12 / 2020
Answer:
You need wires EE079H or XW-DU01 , and plates FR232B
Question:
Hello there. I have a barracuda plate holder. Can these be installed on it? What else do i need to install these indicators. I have a Tracer 900 of 2016. Many thanks.
September / 29 / 2022
Answer:
Usually aftermarket plate holders have 8mm brackets where 8mm indicators can be fixed, if so these indicators are correct. You need also cables EE088H
Questions & Answers placed here are related to the nature of this product, how it works, where it works, if it is useful etc etc, if you need help on another part please do not place your question here but inside its page.
This is not either the right place where to ask for price, availability, delivery, shipping, for this info click on "MyCarpiMoto" and then "Contact" at the top of the page.
Your Privacy: Do not add any personal information inside the question box, such as name, email, phone, everyone would read it; to protect your privacy, every question which includes personal informations is by default canceled.