Brembo, through a relevant engineering work, succeeded in producing a monobloc caliper at an interesting price but keeping very high technology.
The structural design, of course radial, is MONOBLOC type as already said. Of course a real monobloc, like those used in MotoGP and SBK from the majority of the riders, that is to say without the lateral caps which hold the pistons. Brembo, unequalled in the world, developed this technology so as to assure unique stiffness and working precision.
TECHNICAL INFO:
- Fixing hole distance 100 mm
- Off-set = 30mm
- Perfectly interchangeable with the Brembo Street radial calipers
- 4 pistons Ø 34mm
- 2 high performance brake pads
- pads anti-vibrating springs
- double piston seals
- Red Brembo logo, hand painted, identifying a Racing products
The kit is supplied in box with sponge rubber and includes Brembo stickers and Thermotapes to check the working temperature.
Brembo recommends not to install this caliper if the motorcycle oem brake system is a ABS System (for example not recommended on BMW S1000RR without removing ABS Brake lines).
Purchase from us with confidence, Carpi Moto is an authorized and official Brembo Racing Point.
Question:
Hi , need to clarify before committing.This package comes with 2X M4 Monobloc calipers with brackets for the calipers and is compatible with the stock Tmax 530 disc brake ?best regards.
March / 26 / 2013
Answer:
This product includes two calipers, not the brackets as per the picture. Works with stock disks. Brackets are listed in this page amoung linked products.
Question:
How is it compare to the GP4 RX CNC P4 32/32The cylinder of this is 34/34, so should the break power is stronger ?
June / 15 / 2013
Answer:
No, GP4 are racing calipers, these are street/sport calipers. There is a huge difference, GP4 are much better.
Question:
Hello , will these callipers work well with my STOCK Brake discs on my Yamaha Tmax 530 or will i have hissing sound problems and not so good braking power if i don't proceed with replacing the stock Brake discs with Brembo ones as well?
December / 12 / 2013
Answer:
These calipers work fine with stock disks. You will not have noise problems if you will use pads coming with the caliper and you will replace the pads with high quality pads.
Question:
Will I be able to find the same Brembo pads, that come along with the M4 Callipers, when it is time for replacement?Which Brembo pad is this(part number-code)?Also if at some point in the future,I decide to change the discs with Brembo Oversized ones, will I have to use a different set of brackets than the one listed here for the stock discs?
December / 12 / 2013
Answer:
Replacement pads are listed in this page and will be always available, they are oe pads on most modern motorbikes line Ducati , Suzuki, Triumph. To install oversize you need a pair of brackets. You need also adaptors to install on stock disjìks, but you probably already knew that.
Question:
Hi, what kind of pads are sold with it? Are the Z04 compound?Fantastic site!!Best regards
March / 20 / 2015
Answer:
Hi, they have Brembo 07BB3090 included. Thanks for the compliments
Question:
HiThere is notice not to install on abs system.So tmax 2013 with abs system cant use this caliper? How about change the braided brake line like frentubo?Thank's
July / 26 / 2015
Answer:
Hi you can't use them with ABS System. If you want this calipers you should remove ABS System.FrenTubo brake lines are the first step to modify your brake system
Question:
So if use frentubo brake line for tmax abs it would be okay no problem with the abs?Install like normal bike without abs?
July / 27 / 2015
Answer:
No. You shall remove ABS system replacing ABS hoses with NO ABS hoses specific for M4 calipers.
Question:
If not change the calipper.Caliper oem and change the brake line only with frentubo abs.is this would be okay for the abs system?
July / 27 / 2015
Answer:
Hello , if you chane ABS OEM hoses with Fren Tubo ABS replacement hoses you will improve your braking.
Question:
Hello, I plan to purchase the Brembo Set Monobloc M4 34 Radial Calipers To put on my S1000RR 2015 in replacement of the stock calipers. (4-pads par caliper Z04 brake pads are too expensive on the stock calipers + I prefer the feeling of the M4 I had on my S1000RR HP4)I have few questions before to send my order:1. Are these M4 the same calipers as the original stock ones mounted on the S1000RR HP4?2. Do these M4 calipers have the large hole at the bottom (larger than the bolts diameter) to fit the BMW “guides” on the BMW fork. If not, is it safe to remove the guides? I’d prefer to keep them since if removed, the caliper will partially stand on a hole.3. Can I keep the stock braking lines with the M4? (I’ve heard that OEM banjos do not have the correct angle for the M4 and do not fit). If stock lines do not fit, which parts do I need to order to replace them? (it is a S1000RR with ABS (switched-off on track))4. Which additional parts do I need to order like banjo bolts (do the stock ones fit with the M4?) and banjo washers (I guess they need to be replaced when the banjo is dismounted) etc… to be sure I do not miss anything when starting replacing the calipers on the bike.Thanks for you answers
September / 14 / 2015
Answer:
Hello, Brembo recommends not to install this caliper if the motorcycle oem brake system is a ABS System. To use M4 on your bike you have to remove the guides. It's not dangerous (Ducati use M4 without guides). You can't keep oem braking lines. Right now Fren Tubo doesn't produce braking lines for your bike, but they can produce a line kit custom made.
Question:
Hello,Please confirm if these M$ calipers are the same as what you get stock on the BMW S1000RRHP4. If yes, they use the same fork with guides on and also ABS. So why cane we use these the same way ?
February / 28 / 2016
Answer:
I don't confirm. They could look the same but could be different. For Example HONDA CBR 1000 RR uses a caliper that looks like a M4 but inside pistons are smaller.
Question:
Please specify the part number in black m4 calipers to fit a 2011 BMW s1000rr. Thanks
March / 01 / 2016
Question:
Dear, can i install these on the Benelli 600 GT (2015) ?Best RegardsChristian
April / 02 / 2016
Answer:
We can't confirm, we did not got any bike available to check if the calipers wheelbase is 100mm
Question:
Thanks for your quick reply :-) can i check on the stock (brand Benelli) the calipers wheelbase ? May i ask you :-) how and where i measure up the 100 or 108 mm. caliper wheelbase ? Thanks in advance :-)Best RegardsChristian
April / 03 / 2016
Answer:
From center to center caliper fixing bolt heads.
Question:
I have 2013 built Ducati 796 monster ABS.Will the M4 monobloc brembo calipers fit/ work with the brake abs lines. .. if not, which hp brembo upgrade calipers can I use that are better than my stock brembos that will fit ? Regards Peter
June / 01 / 2016
Answer:
Brembo recommends not to install this caliper if the motorcycle oem brake system is a ABS System. Since Brembo will not proivde an application list or change this issue we will not provide compatibility and we will always suggest not to install these calipers on ABS equipped motorcycles.
Question:
Just to be sure before buying. I own a Ducati 848-SBK 2009. Will these M4 calipers fit without any modification or spacers? Can I use the stock brake lines? What they mean with "30mm offset"?Witch RCS clutch and brake mastercilinder you recommend?Kindest regards
December / 01 / 2016
Answer:
Hi, yes you can install M4 without changing anything else. You can combine them with 19RCS. You can install 16RCS for clutch, code 110A26350
Question:
Hello, the M4 are compatible on T-Max 530 with ABS 2014.
December / 03 / 2019
Answer:
These calipers plug on T-Max 530 2014 using adapters, please read warning about ABS System.
Question:
Will these work as replacement for OEM calipers on a KTM 790 Adventure S (2020) EU model without changing the Master cylinder / brake hoses - and still maintain ABS ? I cannot find til piston size for OEM calibers.
October / 06 / 2022
Answer:
We don't know the stock master cylinder piston diameter, in any case to your question we must answer NOT POSSIBLE.
Question:
Few years ago I upgraded my bike with the Brembo 19RCS radial brake mc. Now using Nissin axial calipers. Already bought brackets for radial calipers but what is the difference between M4 and M50 ? And which will work best with the 19RCS ?
February / 21 / 2023
Answer:
M50 is the caliper that came after M4 . 19RCS works with M4 ; 17RCS works with M50 . Best match for 19RCS is M4 .
Question:
Hi CarpiMoto. Was informed that there are 2 versions of the M4 calipers that will fit the BMW S1000RR 2018. May I know the differences and which version is this caliper you have? Thank you very much. Cheers
July / 18 / 2023
Answer:
The color, Grey or Black, we list both inside this page.
Question:
Hello CarpiMoto. How about the M4 version used by BMW on the HP4, the one that uses dowels/bushings to help keep the calipers aligned with the rotors, do you have those? Cheers
July / 19 / 2023
Answer:
They are sold to BMW only. They help when you mount the calipers, it is a typical parts to help BMW users. Ducati, Aprilia, KTM, Triumph never asked this part because there is no need to have but help users.
Question:
Hello CarpiMoto. By the way, will this work with a 17RCS Corsa Corta? I know 17 is for 32mm pistons and below, generally. But will it still work? Will just be less strong bite than the 19RCS? Thank you very much. Cheers
August / 08 / 2023
Answer:
No. These calipers works only with 18 or 19 mm master cylinders.
Question:
Hi guys -- Can I use these with the Brembo Racing 19 RCS radial brake? If not, could you give a recommendation which calipers would work. Many thanks!
November / 20 / 2023
Question:
HelloI used ONE of these M4 108 caliper on my bike.Could you please tell me what axial master cylinder diameter is required for it.Many thanks in advance.
December / 01 / 2023
Answer:
Depends on which bike. For Street we recommend at least a 15mm, the ideal choice would be a 16mm.
Question:
hi caprimoto,i need 2 single banjo bolts and waschers to fit my brakeline to my brembo M4 calipers,do you have this in a kit?or can you give me the number or link of these parts so i can put it in my basket to order incl.some other parts.kind regards
December / 12 / 2023
Answer:
The banjo bolt is listed inside this page Part Number: B19001CR , just click over and inside the page you will get also the washers Part Number: B22001
Questions & Answers placed here are related to the nature of this product, how it works, where it works, if it is useful etc etc, if you need help on another part please do not place your question here but inside its page.
This is not either the right place where to ask for price, availability, delivery, shipping, for this info click on "MyCarpiMoto" and then "Contact" at the top of the page.
Your Privacy: Do not add any personal information inside the question box, such as name, email, phone, everyone would read it; to protect your privacy, every question which includes personal informations is by default canceled.