Language:Country:




TecMate Optimate 6 Battery Charger

TecMate Optimate 6 Battery Charger


TecMate Optimate 6 Battery Charger
TecMate Optimate 6 Battery Charger


Manufacturer:
Tec Mate
Part Number:
TM180
Our Price
€ 98,54

(Discount: 18,02%)

MSRP

€ 120,20



Quantity 
Shipping (U.S.A.): € 39,50
(Priority International Courier (2 business days))
Estimated delivery date: 30/05/2012
Availability:  In Stock
Payment Methods:
  • Cash on Delivery (banknotes)
  • Credit Card
  • Bank Transfer
Returns: 30 days prompt exchange or full refund. 
  • TecMate Accumate Battery Charger
    Choose the model: Bike / Car
    Part Number: AM612VDE
    Availability:: In Stock
    Our Price: € 57,85


  • TecMate Optimate III PLUS Battery Charger
    Choose the model: Bike / Car
    Part Number: OM3VDE
    Availability:: In Stock
    Our Price: € 51,65


  • TecMate Accumate PRO Battery Charger
    Choose the model: Car / Bike
    Part Number: AMPG12V4A
    Availability:: Ships in 5 days
    Our Price: € 87,66


  • TecMate Optimate 4 Battery Charger
    Choose the model: Bike / Car
    Part Number: TM140
    Availability:: Sold Out
    Our Price: € 57,50


  • Deca SM 1208 Bike / Car Battery Charger, 0,8 Ah, for batteries 1,2-35 Ah
    Choose the model: Bike / Car
    Part Number: SM1208
    Availability:: In Stock
    Our Price: € 32,23


  • Deca SM 1236 Car / Bike Battery Charger, 3,6 Ah, for batteries 1,2-120 Ah
    Choose the model: Car / Bike
    Part Number: SM1236
    Availability:: In Stock
    Our Price: € 40,50


  • TecMate Optimate 6 Battery Charger
    Choose the model: Car / Bike
    Part Number: TM180
    Availability:: In Stock
    Our Price: € 98,54


  • Deca SM 1236 Battery Charger, 7 Ah, for batteries 14-225 Ah
    Choose the model: Car / Bike
    Part Number: SM1270
    Availability:: In Stock
    Our Price: € 57,02


  • TecMate Optimate 4 Dual Program Battery Charger
    Choose the model: Bike / Car
    Part Number: TM140DUAL
    Availability:: In Stock
    Our Price: € 65,29



Description


The world’s most advanced diagnostic battery optimizer, now with 5A charge current!

  • Saves neglected batteries other chargers can't
  • Optimizes battery power and life
  • 24/7 automatic storage control
  • Early warning of battery problems
  • AMPMATIC current control with cell equalization

OptiMate 6 ampmatic is the world`s most advanced and versatile battery charger, maintainer and tester. An all in one unit, which is stylish and robust in a weatherproof enclosure that includes wall mounts and cables rated down to -40 F/C, specifically for users in the water & snow markets.

Each time you connect the OptiMate 6 to a battery the microprocessor automatically diagnoses the condition and automatically chooses the best charge current & program.
OptiMate 6 is able to correctly initialize & charge new sealed batteries where the user is adding the acid pack to the battery.
Use on all lead-acid batteries (STS/AGM/MF/GEL) from 15Ah to 240Ah.

This enhanced multi-stage version of the acclaimed OptiMate desulfation program will automatically save many “dead” batteries.
The eco friendly program ensures low power consumption while keeping your battery maintained, fully charged and safe, month after month, prolonging it`s life by up to 400%.
OptiMate 6 Battery performance guaranteed !
An important attribute of the OptiMate 6 is, as with all OptiMates, the safe, optimal maintenance of your battery during long term storage, achieved by its gentle maintenance cycle which automatically allows the battery to rest for 30 minutes of each hour of the maintenance cycle while it remains connected.

The OptiMate has been recommended by more established global motorcycle manufacturers than all competitor products COMBINED

How it works

  1. Initialization: OptiMate 6 will only activate if the battery voltage measures at least 1.8V.
  2. Programming: the ampmatic processor checks the battery’s condition to determine the appropriate charge program.
  3. Desulfation and recovery: if necessary, 2 or 3 stages of high voltage and oscillatory pulsing are applied to recover neglected, flat batteries (removed from the vehicle * ) from sulfation to a chargeable state.The voltage is limited to 16V if the micro processor detects the battery may be connected to vehicle circuitry.
  4. Bulk charge: the ampmatic processor actively adjusts charge current to match battery characteristics, achieving a complete charge in the shortest time.
  5. Short-circuited / dead cell check: Charge acceptance is continuously monitored to detect internal damage and prevent unnecessary charging of a battery that cannot be recovered.
  6. Absorption and equalization: for 10 minutes the current is delivered in pulses with voltage controlled between 13.7 and 14.3V, aiding cell voltage equalization and improving the battery's overall power delivery.
  7. Charge verification: the voltage is limited at 13.6V while the ampmatic processor monitors the current absorbed by the battery. If this reveals a less than optimal charge, the program reverts to absorption for a further 10 minutes.
  8. Voltage retention test: is conducted for 30 minutes during which no charge current is delivered, with 5 possible test results indicating the battery's general state of health. A green (voltage > 12.7V) result extends the test up to 12 hours, to check for excessive self discharge (even a partly damaged battery may initially retain sufficient power, but lose power faster than normal there-after) or higher than expected power loss through the vehicle’s electrical system.
  9. Charge maintenance: The MAINTENANCE CHARGE CYCLE consists of 30 minute float charge periods at a voltage of 13.6V followed by and alternating with a 30 minute ‘rest’ (no charge current) periods.The voltage retention test & maintenance charge cycle will repeat 24 hours after the start of the very first test and continue to repeat for as long as the charger remains connected.
    The alternating charge & 'rest' maintenance program provides the recommend maintenance voltage for AGM / GEL batteries whilst reducing the average voltage as required by STD filler cap batteries, making it ideal for indefinite & 100% safe long term maintenance charging of any type of 12V lead-acid battery.
    *The OptiMate’s high voltage desulfation mode cannot engage unless the battery is first disconnected from the vehicle’s electrical system. However, even if the battery is not disconnected, the OptiMate cannot damage sensitive vehicle electronics as the higher voltage mode can only engage if minimal or zero current is flowing into the battery.
  • Meets all relevant UL & CSA standards.
  • Comprehensive selection of SAE connection accessories including an output extension set.
 



Support Forum


New Question
Questions & Answers placed here are related to the nature of this product, how it works, where it works, if it is useful etc etc, if you need help on another part please do not place your question here but inside its page.
This is not either the right place where to ask for price, availability, delivery, shipping, use "Contact" at the top of the page.

I authorize to show my name to the other users (optional)

I authorize to show my email to the other users (optional)

I have read and integrally accept information about use of personal data

*obligatory fields (will be displayed under your authorization only)




Linked Products




Choose the model




FAQs


FAQs

Do I need an account to shop at Carpi Moto ?

Do you ship to my country ?

How Much does Shipping Cost ?

Calculator icon, what's that ?

When will you ship my order ?

How do I pay for my order ?

Can you display prices in my currency ?

Will you charge taxes on my bill ?

Do you issue an invoice ?

How can I find parts I'm looking for ?

How can I place an order ?

Is my order confirmed ?

Can I create a Wish List ?

Do you provide a guarantee ?

Are Carpi Moto products street legal ?

Search by Bike


Basket is Empty

Quick Insert

 x