| Language: | Country: |
Product Overview
Don’t have a dyno tuning center nearby? Are you more of a D.I.Y. (do it
yourself) type? Are you constantly changing parts on your bike? If you answer
"yes" to any or all of the questions above, then our Auto Tune kit
is for you.
The Dynojet Auto Tune kit is an "add on" accessory that can be used
with any of our Power Commander V’s. It connects to the PCV with a single
cable and requires only a ground and +12 volt connection to be made to install
(Harley models include connector for plugging directly into the bikes’
+12 volt line). If your exhaust does not already have one, a "weld in"
O2 sensor bung is included.
"Well, how does it work and what does it do for me?"
We have taken virtually the same technology that our patented Tuning Link dynamometer
software (for automated Dyno tuning) uses, along with Bosch Wide Band O2 sensors
and miniaturized it to be used on your bike, ATV, or UTV, while you ride. Once
installed, the Auto Tune kit monitors the fuel mixture (by installing the included
Wide Band O2 sensor in the exhaust). It then sends this information to the Power
Commander V and automatically corrects it while you ride. Each map that we offer
has preset Air/Fuel ratio values included that we find to be the best overall
settings. This lets you simply plug in the unit and let it do the work. For
Harley Davidson models we ever monitor and adjust each cylinder individually
for increased precision as on these models required fueling can vary significantly
between the front and rear cylinder. For advanced users that would like to change
the Air/Fuel ratios from our baseline they are fully adjustable. Each throttle
opening/rpm combination is individually adjustable, so that you can have both
fuel economy, during cruise, while maintaining peak output at larger throttle
openings. For most models of bikes it is also possible to adjust the Air/Fuel
ratios "per gear". This gives you total control of the fueling in
every gear and throttle/rpm area if required.
The Auto Tune kit can be configured to run and correct at all times or by using the "map switch port" on the PCV. You can set it up so that you can switch back and forth between the tuning modes and the base map settings. You can also configure the Auto Tune kit to wait until the bike is at a certain operating temperature before beginning to make adjustments.
Currently Dynojet offers two different Auto Tune kits.
Part #AT-100
The first is a "dual O2 sensor" version made specifically for Harley
Davidson models. It comes with two O2 sensors, two control modules, CAN connection
cables, and custom length sensor cables. It also includes a built in power connector
that plugs directly into the bikes’ wiring harness for easy connection.
Part #AT-200
The second version is a "universal fit", single O2 sensor kit. It
can be used on any vehicle that has a PCV installed on it. It comes with a single
O2 sensor, "cut to length" sensor cable, control module, O2 sensor
"weld on bung" and CAN connection cable. It requires a ground and
+12 volt connection be made using the supplied Posi-Taps.
New Question
Questions & Answers placed here are related to the nature of this product, how it works, where it works, if it is useful etc etc, if you need help on another part please do not place your question here but inside its page.
This is not either the right place where to ask for price, availability, delivery, shipping, use "Contact" at the top of the page.


Quick Insert