| Language: | Country: |
| Features: | |
|
|
| MyChron Light TG main features: | |
![]() |
Best lap, latest lap and running time on the display while running. MyChron Light TG shows lap time in a wide 18mm format as well as other useful information, like actual Lap Number and best lap time when recorded. |
![]() |
Up to 5 split times with dedicated optical transmitters. MyChron Light TG can also manage Split Times; you may configure it in order to have: Sector Time, Accumulative Split Time or Variation Split Time. Sector Time gives you the split time of a single sector. |
![]() |
Accumulative Split Time gives you the time elapsed since start/finish
line. In the picture 41seconds have elapsed from start/finish line untill this split has been recorded. |
![]() |
Variation Split Time gives you the gap between current split time and
the same split time of the previous lap. In the picture: gap between current split time and the same split time of previous lap is 0.27 seconds |
![]() |
Practise - Qualify - Race Configurations (informations shown at the
top left corner) |
![]() |
Qualify mode shows the remaining time untill the end of the session. In the picture: 5:52 min to the end of the session. |
![]() |
Race mode shows how many laps remain untill the end of the race. In the picture: 4 laps to the end of the race . |
![]() |
Fast Graphical Visualization of recorded data: At the end of the test, data can be analyzed in a very fast graphical way. |
![]() |
Table Format Lap Time Visualization: data can be shown in a table format showing all split times in a lap. |
| MyChron Light TG other features are: | |
![]() |
Personalized graphical screen image You can trasnmit your MyChron Light TG any 128x64 bmp black and white picture, so to have it shown at each power on. It is a perfect way to show the Team Logo. Download here the Picture Manager and some funny logos |
![]() |
Date Time Track Each test reports the name of the track where it has been recorded as well as date, time and week day. |
![]() |
Your Name - The Track You can enter the driver's name as well as up to 50 track names in the memory of your laptimer. |
| MyChron Light TG optional data download and Light Analyzer software: | |
| All recorded data can be downloaded to your Pc using an optional USB data download cable and analyzed through Light Analyzer (3,5MB download software here and 300k manual here), the software properly designed and developped by AIM for MyChron Light TG | |
![]() |
Data related to laps can be shown as histograms and each split time has a different blue shadow. Lap without split times are highlighted in red colour. |
![]() |
Data related to runs are all shown in a layer and thay can be shown as figure or as histograms. Moreover you have also a run compare layer |
| MANUAL | Download English Manual here |
| Datasheet | Download Datasheet here |
FAQ:
- Q: How do I place My Chron on my bike? A: normally is placed on the upper triple tree using 2 biadhesive layers.
- Q: Has it to be wired? A: Depends on the model you choose.
- Q: If in the pit lane there is more than one transmitter what's happen? A: the infrared receiver recognize the first transmitter, stops receiving any other beam and displays lap time; only after 8 seconds (programmable) will be ready again to receive another beam .
- Q: If we are a group of riders how many My Chron do we have to buy? A: one for each bike, in fact every display takes lap times only for one bike.
- Q: If we are a group of riders can we buy as many displays as many bikes we have and only one transmitter? A: Yes sure, buy one full system and then as many lap timer you like
Question:
Greetings,
What are the differences between X04MYC40TG & X04MYC40TGL
I couldn't find them on your web site.
Kind Regards,
Kostas Fotiadis
13/02/2007
Answer:
The difference is how they get power, this one works with an external supply, the other with batteries inside







Quick Insert